How To Insert Ink Into Canon Printer In 5 Easy Steps

If you are changing the ink cartridge into Canon printer for the first time, you should read this full blog to know everything about doing it correctly. In short, the process is straightforward and takes no extra effort. There are only 5 steps to change or insert ink into your Canon printer. Each Canon Pixma model has a different design and configuration; the process for changing the ink is the same. So, let’s move to how to insert ink into Canon printer.

How To Insert Ink Into Canon Printer?

There are five simple steps to insert ink into Canon printer:

Check For The Correct Ink

It’s a basic thing to take care of. It may seem obvious, but some people still choose the wrong ink type for their printers and get into trouble fixing them. In order to avoid this mistake, go to the Canon support page and find the ink compatible with your Canon printer.

Open The Printer Cover

Once you find a compatible ink for your printer, open the printer cover. The procedure to open the cover may vary from model to model. Hence, check the instruction manual for this. When opened, the printer cartridges should slide in an appropriate position.

Pull Out The Empty Cartridge

If you have already installed the cartridge, you need to remove it to fix another. You can skip this step if you insert ink for the first time. To remove the empty cartridge, slowly press the front of it down so it clicks, and then pull it out. Don’t put pressure to pull it out.

Insert The New/Replacement Cartridge

Take your new ink cartridge and remove all the packaging to reveal the print nozzle. Then, fix it in its respective slot with the back at an upward angle. And then, when you lift the front of the ink cartridge, you will hear a click sound. Now, the ink cartridge is in its place.

Close The Printer Cover

Once you fix the ink cartridges in their place, the printer will confirm that you are ready to go. Different models may prompt differently. Maybe your printer tells you something else to confirm.

What Should You Remember While Changing The Ink?

If you are changing or replacing the Canon ink cartridges, you should consider a few points before doing so. Look at them and remember them while going to change the ink in the Canon printer.

Using only the genuine ink cartridge is recommended instead of going with the third-party or less effective ink cartridges as they may clog your printer’s print head. If you want to remove the ink cartridge from your Canon printer, instantly replace the ink, increasing the ink level.

Use a clean white cloth to wipe out the ink cartridge. Don’t leave the ink cartridge door open in your Canon printer once you change or replace the ink cartridge. Always use an ink cartridge mentioned with the proper date of use.

How To Replace Ink In Canon Printer?

If you want to replace your Canon printer’s ineffective or empty cartridge, you can do it easily by following some steps. Walk through the below steps to do so,

Start by opening the access door of the Canon printer. Then, release the old or empty ink cartridge by pushing it down. Once you pull out the previous ink cartridge, take the new cartridge and remove its packaging.

Thereafter, insert the new cartridge at its respective place. Then, you need to close the access door and wait until the cartridge sets well. Finally, take a test print to check whether the new cartridge is working well or not.

How To Check Ink Status On Canon Printer?

You can check it in many ways. You can check this via the lamps or an application. So, let’s discuss the steps on how to check ink status on Canon printer through ink lamps. The light monitors are present on your operation panel of the printer. So, how will you check? When the light of the color ink blink, it shows that the ink is running low.

Let’s see how to check ink status on Canon printer via the application:

First, open the Canon IJ Status Monitor. You get this application with printer installation. Then, click maintenance, and it will take you to the Printer Status. To check the ink status, click Ink Detail.

Conclusion

Putting ink into Canon printer is important to keep the printer functioning properly. You should know how to insert ink into Canon printer correctly because you may skip something while putting the ink cartridge into your printer. The first and foremost thing is finding the correct ink type for your printer. Otherwise, you will put the wrong type and get errors. Also, check the quality of the ink you are purchasing. It should be genuine and from the Canon manufacturers. Avoid believing the third party for purchasing the ink cartridges. Plus, check the ink levels regularly to keep updated with the printer’s status.

Visit — ij.start.canon

Source URL: — https://canijprintersetup.com/how-to-insert-ink-into-canon-printer/